HP-2 Hurricane Tattoo Power Supply Digital ABS Material Micro Processor Controlled Unit

HP-2 Hurricane Tattoo Power Supply , Digital Tattoo Power Supply Black And Silver

Specification

1. If we want tattoo machine to get a wonderful performance, power supply is a very important part, you can image that If the power current is not stable, the motor rotation speed will be out of control, at the same time, the stroke speed of needle will be sometime fast, and sometime slow, which will affect the machine’s work strongly.

2. If you choose this hurricane power tattoo power supply, there will be no any worries about it, This digital power supply made of reliable material, there is a digital micro-processor controlled unit in the device.

3. There is a high definition LED screen in the front of product, it shows work voltage, rate of work, time, electric current, loading percentage, timer, and operation mode.

4. It allows 18v at most when it works, which is enough to use high power machine, don’t need to worry the voltage.

5. Computer digital control system, you can tread the pedal when working, If you don’t push the pedal, it

also can work.

6. There are total 5 buttons in the middle of the device, the up and down button for voltage increase and decrease, “L” button means Liner operation mode, “S” button means shader operation mode. The button in the middle is for timer, which is very easy to operate.

7. There are 4 jacks at the bottom, from left to right, which is power connecting jack, clip cord jack, pedal jack, receiver jack.

Pictures